Epoxy resin dry-type transformer: Experience the advanced engineering of our Epoxy Resin Dry-Type Transformer, designed for unparalleled performance and reliability.
Safe, efficient, environmentally friendly, and energy-saving power solutions: Discover power solutions that epitomize safety, efficiency, and eco-friendliness, while significantly reducing energy consumption.
| parameter term |
parameter values |
| rated voltage |
Various specifications available, such as 20KV, 10KV, 6KV, etc. |
| Capacity range |
Various specifications are available, such as 500KVA, 630KVA, 800KVA, 1250KVA, etc. |
| Cooling Method |
Natural air-cooled/forced air-cooled (according to specific models) |
| Insulation material |
Epoxy resin or other high-performance insulating materials |
| Protection class |
IPXX (according to the specific model, need to mark the specific level) |
| Winding type |
Foil winding structure (low voltage) / "trapezoidal" segmented layer structure (high voltage) |
| Core material |
High quality cold rolled grain oriented silicon steel sheet |
| Technical Data Sheet for 6KV, 10KV Class 10 Dry Type Non-Excited Regulated Distribution Transformer |
| nominal capacity |
Connection
group labeling
|
Voltage combination |
No-load
current
|
No-
load loss
|
Load Losses at Different Insulation Thermal Ratings |
Short Circuit
Impedance
|
| B(100ºC) |
F(120ºC) |
H(145ºC) |
| 30KVA |
Yyn0
Dyn11 |
6-11±2×2.5%/0.4 |
2.1 |
190 |
670 |
710 |
760 |
4.0 |
| 50KVA |
2.1 |
270 |
940 |
1000 |
1070 |
4.0 |
| 80KVA |
1.6 |
370 |
1290 |
1380 |
1480 |
4.0 |
| 100KVA |
1.6 |
400 |
1480 |
1570 |
1690 |
4.0 |
| 125KVA |
1.5 |
470 |
1740 |
1850 |
1980 |
4.0 |
| 160KVA |
1.5 |
540 |
2000 |
2130 |
2280 |
4.0 |
| 200KVA |
1.3 |
620 |
2370 |
2530 |
2710 |
4.0 |
| 250KVA |
1.3 |
720 |
2590 |
2760 |
2960 |
4.0 |
| 315KVA |
1.1 |
880 |
3270 |
3470 |
3730 |
4.0 |
| 400KVA |
1.1 |
980 |
3750 |
3990 |
4280 |
4.0 |
| 500KVA |
1.1 |
1160 |
4590 |
4880 |
5230 |
4.0 |
| 630KVA |
0.9 |
1340 |
5530 |
5880 |
6290 |
4.0 |
| 630KVA |
0.9 |
1300 |
5610 |
5960 |
6400 |
6.0 |
| 800KVA |
0.9 |
1520 |
6550 |
6960 |
7460 |
6.0 |
| 1000KVA |
0.9 |
1770 |
7650 |
8130 |
8760 |
6.0 |
| 1250KVA |
0.9 |
2090 |
9100 |
9690 |
10370 |
6.0 |
| 1600KVA |
0.9 |
2450 |
11050 |
11730 |
12580 |
6.0 |
| 2000KVA |
0.9 |
3050 |
13600 |
14450 |
15560 |
6.0 |
| 2500KVA |
0.7 |
3600 |
16150 |
17170 |
18450 |
6.0 |
Basic structure of dry-type transformer: Unveil the core components that make our dry-type transformers remarkably efficient and reliable.
1. Iron core: Composed of meticulously stacked silicon steel sheets, the iron core forms the essential magnetic circuit for guiding magnetic flux within the transformer.
2. Winding: The division into high-voltage and low-voltage windings ensures seamless conversion and transmission of electrical energy as they are precisely wound on the iron core.
3. Insulating cylinder: Strategically placed between high and low voltage coils, this component enhances electrical insulation, ensuring the transformer's operational safety.
4. Pads: These are crucial for supporting and maintaining the stability and structural integrity of the coils.
5. Fasteners: Engineered with anti-loosening technology, these fasteners robustly connect and secure each component of the transformer.
Product Description: Delve into the intricacies of our product offerings for a transformative electrical experience.
Overview: Get a comprehensive overview of our state-of-the-art 10kV dry-type transformer, an epitome of safety, fire prevention, and pollution-free operation, extensively utilized across various power systems in industrial, commercial, and civilian sectors.
10kV dry-type transformer is a kind of transformer whose core and windings are not immersed in insulating liquid, which has the advantages of safety, fire prevention, no pollution, etc. It is widely used in power systems in industrial, commercial and civil fields.
Main features: Discover the standout features that differentiate our transformers, ensuring optimal performance and reliability.
Superior safety performance: Experience unparalleled safety features, including fireproofing and pollution-free operations, that enhance system security by allowing direct operation in load centers. fireproof, no pollution, can run directly in the load center, improve system safety.
High mechanical strength: Our transformers boast incredible mechanical strength, showcasing strong short-circuit resistance, minimal partial discharge, exceptional thermal stability, and an extended service life. strong short-circuit resistance, small partial discharge, good thermal stability, long service life.
Remarkable energy-saving effect: Designed for the modern era, these transformers minimize loss and noise while maximizing operating efficiency, perfectly aligning with today's energy-saving and environmental standards. low loss, low noise, high operating efficiency, in line with modern energy saving and environmental protection requirements.
Excellent heat dissipation performance: Outstanding heat dissipation capabilities enable robust operating performance, with forced air-cooling further augmenting operational capacity. good heat dissipation performance, strong operating capacity, forced air-cooling can increase the capacity of operation.
Strong environmental adaptability: Our transformers are designed to excel in the most demanding environments, offering superior moisture-proof performance to withstand high humidity and other challenging conditions. good moisture-proof performance, adapting to high humidity and other harsh environments.
Low maintenance cost: Benefit from the eco-friendly, flame-retardant, and explosion-proof design that ensures maintenance-free operation, significantly reducing operational and upkeep expenses. environmentally friendly, flame retardant, explosion-proof, maintenance-free and other features, reducing operation and maintenance costs.
Small size and light weight: Enjoy the advantages of compact design and lightweight construction, facilitating effortless transportation, installation, and space conservation. easy transportation and installation, space saving.
After-sales service: Experience unparalleled customer support through our comprehensive after-sales services, ensuring your complete satisfaction and peace of mind.
Provide comprehensive pre-sales consulting and program design services.
Provide free repair or replacement service for faults caused by product quality problems during the product warranty period.
Provide lifelong technical support and after-sales service to ensure that customers have no worries.
Application scenario: Our transformers are versatile, finding application in diverse scenarios to power the future.
Factory Scene: Witness the transformative impact our products have in industrial settings, driving innovation and efficiency.
Certificates: Our products are backed by industry certifications, affirming their quality and reliability.
FAQ: Find answers to the most common questions, ensuring you make an informed decision.
1. Are you a trading company or manufacturer?
We are a professional factory with 10 years experience in the field of High and Low voltage switchgears, Substation, transformers, cable distribution box, and various electrical equipment, such as vacuum circuit breaker, load break switch, etc.
Our factory is the excellent supplier of State Grid Corporation of China.
2. Do you accept customized service?
We offer OEM/ODM service and can print your logo on products. Our professional technical and quotation team can provide a satisfying project tailored to your drawing and parameters.
3. What is your Minimum Order Quantity (MOQ)?
Our Minimum Order Quantity is a single piece. This ensures flexibility and accessibility for all our valued customers, allowing you to start benefiting from our top-tier products without the need for bulk purchases.
4. What is the estimated delivery lead time?
The delivery lead time varies depending on your specific product requirements and the quantity ordered. Generally, we strive to ensure that our high-quality products reach you within 5 to 10 working days, combining efficiency and reliability.
5. How do you address quality issues?
To effectively address any quality concerns, please provide comprehensive photographs highlighting the issues. Our dedicated technical and quality testing team will conduct a thorough analysis and commit to providing a satisfactory resolution within 48 hours, ensuring your complete peace of mind.
6. What are the available payment terms?
We offer flexible payment terms to accommodate your needs: 30% T/T in advance and 70% before shipment. We also accept payments via Western Union and L/C, providing you with multiple convenient options.
){kind=link}